Certificate
Certificate
Confirms that RUNDT vacuum frames comply with current requirements.
DownloadRUNDT Series
Corner vacuum frame for internal corner
Price on request
A solution for monitoring internal corners and mates where a flat frame does not provide the desired contact geometry.
Purpose
- Used on internal corners where precise frame geometry is required.
- Suitable for monitoring the tightness of critical components and connections.
- If necessary, can be made to individual sizes.
Standard sizes
We will send you the current cost of the selected standard size and delivery time in response to your request.
| Frame size | Status | Note |
|---|---|---|
| 530×75 | ||
| 380×80 |
Available sizes to order
Below are the sizes and designs found in the RUNDT range for this type of frame. Non-standard items are calculated upon request.
| Name | Comment |
|---|---|
| Vacuum corner frame for internal corner 530x75 | Angle 90° standard |
| Vacuum corner frame for internal corner 500x60 | Angle 90° |
| Vacuum corner frame for internal corner 335x70 | Angle 90° |
| Vacuum corner frame for internal corner 120x120 | Angle 90° |
| Vacuum corner frame for internal corner 275x75 | Angle 90° |
| Vacuum corner frame for internal corner 380x80 | Angle 90° |
| Vacuum corner frame for internal corner 630x75 | Angle 90° |
| Vacuum corner frame for internal corner 300x80 | Angle 90° |
| Vacuum corner frame for internal corner 150x140 | Angle 90° |
| Vacuum corner frame for internal corner 150x75 | Angle 90° |
| Vacuum corner frame for internal corner 530x80 | Angle 135° |
| Vacuum corner frame for internal corner 370x115 | For L-joint 1200 |
| Vacuum corner frame for internal corner 390x100 | Internal corner |
| Vacuum corner frame for internal corner 750x150 | Internal corner |
Series Technical Data
| Parameter | Meaning |
|---|---|
| Method | Vacuum Bubble/Mass Spectrometry |
| Service life | at least 10 years / 40,000 hours |
| Manufacturing | Standard and to order |
Product Photos
Where applicable
- Internal corners of tanks and steel structures
- Control of responsible nodes
- Difficult repair areas
Questions about the item "Corner Vacuum Frame for Inner Corner"
For which applications is the "Inside Corner Vacuum Frame" position suitable?
The "Inside Corner Vacuum Frame" option is used on inside corners where precise frame geometry is required. Suitable for monitoring the tightness of critical components and connections. Typical tasks include: Internal corners of tanks and metal structures, Inspection of critical components, Complex repair areas.
Are there standard items for “Corner vacuum frame for internal corner” and how is the purchase usually carried out?
For this position, selection is usually carried out according to the geometry of the object, so procurement begins with the parameters of the control area. To make a request, simply send the dimensions, description of the inspection area and application conditions, after which a design from the manufacturer RUNDT is selected.
Is it possible to make "Inside Corner Vacuum Frame" according to customer's specifications?
Yes. If the standard geometry is not suitable, RUNDT / TECH NK LLC can produce such a frame according to the customer’s dimensions, drawing, sketch or photo of the inspection area. This is relevant for non-standard seams, complex knots and special conditions of use.
What documents are available for "Inside Corner Vacuum Frame" from the manufacturer?
RUNDT / TECH NK LLC provides the most complete open package of documents on serial vacuum frames, available for preliminary technical and procurement consideration. The website publishes a certificate of conformity, a title page of technical specifications, assortment materials and other confirmed information on the products of the series.
What needs to be sent to select or request a manual for the position “Corner vacuum frame for internal corner”?
For selection, it is usually enough to send the type of product, the dimensions of the control zone, a brief description of the object, a photo of the site, a drawing or technical specification. This allows you to quickly determine whether a standard item is suitable or whether a custom product is required.
Other frame types
Corner vacuum frame for external corner
Used on outside corners and protruding structural members.
Dimensions
530×75×75
Applications
External corners andInspection of metal structures…
Flat Vacuum Frame
Suitable for straight sections and typical welded joints.
Dimensions
620×80340×73
Applications
Inspection of straight weldsReservoirs and capacitive
Vacuum frame 3D pyramid
Used in volumetric and spatial areas.
Dimensions
100×100×100
Applications
Volume areas andNon-standard cont...
Technical Consultation
Request for item "Corner vacuum frame for internal corner"
Submit a task, type size or technical specification. For non-standard sizes we will prepare a separate calculation.