Certificate
Certificate
Confirms that RUNDT vacuum frames comply with current requirements.
DownloadRUNDT Series
Pipe vacuum frame
Price on request
Design for pipelines and curved surfaces where the frame needs to be adapted to the diameter and profile of the area.
Purpose
- Used for monitoring pipelines and curved sections.
- Particularly relevant where a flat frame does not follow the geometry of the object.
- Cost and parameters are determined according to the technical specifications and conditions of the object.
Standard sizes
We will send you the current cost of the selected standard size and delivery time in response to your request.
| Frame size | Status | Note |
|---|---|---|
| Diameter and length according to the task |
Available sizes to order
Below are the sizes and designs found in the RUNDT range for this type of frame. Non-standard items are calculated upon request.
| Name | Comment |
|---|---|
| Vacuum tube frame 250x50 | D100/108, external contour, frame along the axis |
| Vacuum tube frame 190x80 | D159, outer contour, frame at the joint |
| Vacuum tube frame 240x80 | D219, outer contour, frame at the joint |
| Vacuum tube frame 316x80 | D273, outer contour, border at the joint |
| Vacuum tube frame 370x80 | D325, outer contour, border at the joint |
| Vacuum tube frame 420x80 | D426, outer contour, border at the joint |
| Vacuum tube frame 420x80 | D530, outer contour, border at the joint |
| Vacuum tube frame 420x80 | D630, outer contour, border at the joint |
| Vacuum tube frame 420x80 | D720, outer contour, border at the joint |
| Vacuum tube frame 420x80 | D820, outer contour, border at the joint |
| Vacuum tube frame 350x80 | D2500, internal contour, border along the joint |
| Vacuum tube frame 420x80 | D1510, internal contour, frame along the joint |
| Vacuum tube frame 300x80 | D710, outer contour, border at the joint |
| Vacuum tube frame 300x60 | D400, internal contour, frame along the joint |
Series Technical Data
| Parameter | Meaning |
|---|---|
| Method | Vacuum Bubble/Mass Spectrometry |
| Execution | To suit the task and geometry of the object |
| Calculation | Calculated individually |
Product Photos
Where applicable
- Piping
- Curved surfaces
- Complex areas of oil transportation infrastructure
Questions about the item "Tube Vacuum Frame"
For what applications is the "Tube Vacuum Frame" position suitable?
The “Pipe Vacuum Frame” position is used to control pipelines and curved sections. It is especially relevant where a flat frame does not follow the geometry of the object. Typical tasks include: Pipelines, Curved surfaces, Complex sections of oil transportation infrastructure.
Are there standard items for “Tube Vacuum Frame” and how is the purchase usually carried out?
For this position, selection is usually carried out according to the geometry of the object, so procurement begins with the parameters of the control area. To make a request, simply send the dimensions, description of the inspection area and application conditions, after which a design from the manufacturer RUNDT is selected.
Is it possible to make a "Tube Vacuum Frame" according to customer's dimensions?
Yes. If the standard geometry is not suitable, RUNDT / TECH NK LLC can produce such a frame according to the customer’s dimensions, drawing, sketch or photo of the inspection area. This is relevant for non-standard seams, complex knots and special conditions of use.
What documents are available for "Tube Vacuum Frame" from the manufacturer?
RUNDT / TECH NK LLC provides the most complete open package of documents on serial vacuum frames, available for preliminary technical and procurement consideration. The website publishes a certificate of conformity, a title page of technical specifications, assortment materials and other confirmed information on the products of the series.
What needs to be sent to select or request a quotation for the position “Pipe vacuum frame”?
For selection, it is usually enough to send the type of product, the dimensions of the control zone, a brief description of the object, a photo of the site, a drawing or technical specification. This allows you to quickly determine whether a standard item is suitable or whether a custom product is required.
Other frame types
Flat Vacuum Frame
Suitable for straight sections and typical welded joints.
Dimensions
620×80340×73
Applications
Inspection of straight weldsReservoirs and capacitive
Vacuum frame 3D pyramid
Used in volumetric and spatial areas.
Dimensions
100×100×100
Applications
Volume areas andNon-standard cont...
Corner vacuum frame for internal corner
Used on internal corners where precise frame geometry is required.
Dimensions
530×75380×80
Applications
Internal corners reserved...Control of those responsible...
Technical Consultation
Request for item "Tube vacuum frame"
Submit a task, type size or technical specification. For non-standard sizes we will prepare a separate calculation.