Certificate
Certificate
Confirms that RUNDT vacuum frames comply with current requirements.
DownloadRUNDT Series
Round Vacuum Frame
Price on request
Design for areas of circular geometry where it is important to follow the contour and maintain a controlled contact patch.
Purpose
- Used on areas of circular and near-circular geometry.
- Suitable for industrial control of local areas.
- If necessary, it is manufactured in an individual diameter.
Standard sizes
We will send you the current cost of the selected standard size and delivery time in response to your request.
| Frame size | Status | Note |
|---|---|---|
| D 240 |
Available sizes to order
Below are the sizes and designs found in the RUNDT range for this type of frame. Non-standard items are calculated upon request.
| Name | Comment |
|---|---|
| Round vacuum frame D240 | Standard |
| Round vacuum frame D400 | Round design |
| Round vacuum frame D150 | Round design |
| Round vacuum frame D200 | Round design |
| Round vacuum frame D108 | Round design |
| Round vacuum frame D80 | Mini profile, one handle |
Series Technical Data
| Parameter | Meaning |
|---|---|
| Release | Serial |
| Degree of protection | IP65 |
| Resource | at least 10 years |
Product Photos
Where applicable
- Round nodes and control zones
- Tanks and connections
- Equipment with local circular sections
Questions about the item "Round Vacuum Frame"
For what applications is the Round Vacuum Frame position suitable?
The “Round Vacuum Frame” position is used in areas of round and near-round geometry. Suitable for industrial control of local areas. Typical tasks include: Circular units and control zones, Tanks and pipes, Equipment with local circular sections.
Are there standard items for “Round Vacuum Frame” and how is procurement usually carried out?
For this position, selection is usually carried out according to the geometry of the object, so procurement begins with the parameters of the control area. To make a request, simply send the dimensions, description of the inspection area and application conditions, after which a design from the manufacturer RUNDT is selected.
Is it possible to make a "Round Vacuum Frame" according to customer's dimensions?
Yes. If the standard geometry is not suitable, RUNDT / TECH NK LLC can produce such a frame according to the customer’s dimensions, drawing, sketch or photo of the inspection area. This is relevant for non-standard seams, complex knots and special conditions of use.
What documents are available for the "Round Vacuum Frame" from the manufacturer?
RUNDT / TECH NK LLC provides the most complete open package of documents on serial vacuum frames, available for preliminary technical and procurement consideration. The website publishes a certificate of conformity, a title page of technical specifications, assortment materials and other confirmed information on the products of the series.
What needs to be sent to select or request a manual for the position “Round vacuum frame”?
For selection, it is usually enough to send the type of product, the dimensions of the control zone, a brief description of the object, a photo of the site, a drawing or technical specification. This allows you to quickly determine whether a standard item is suitable or whether a custom product is required.
Other frame types
Square Vacuum Frame
Suitable for square and similar control areas.
Dimensions
230×230
Applications
Local zones square...Leak check...
Triangular Vacuum Frame
Used in areas where a triangular frame geometry is required.
Dimensions
195×195×195
Applications
Non-standard cont...Local areas are difficult...
Vacuum frame 3D pyramid
Used in volumetric and spatial areas.
Dimensions
100×100×100
Applications
Volume areas andNon-standard cont...
Technical Consultation
Request for item "Round vacuum frame"
Submit a task, type size or technical specification. For non-standard sizes we will prepare a separate calculation.