Certificate
Certificate
Confirms that RUNDT vacuum frames comply with current requirements.
DownloadRUNDT Series
Square Vacuum Frame
Price on request
Frame for local areas of square geometry, where a compact control area and repeatable results are needed.
Purpose
- Suitable for square and similar control areas.
- Used as a standard solution in local areas.
- Also manufactured according to customer specifications.
Standard sizes
We will send you the current cost of the selected standard size and delivery time in response to your request.
| Frame size | Status | Note |
|---|---|---|
| 230×230 |
Available sizes to order
Below are the sizes and designs found in the RUNDT range for this type of frame. Non-standard items are calculated upon request.
| Name | Comment |
|---|---|
| Square vacuum frame 230x230 | Standard |
| Square vacuum frame 500x500 | Square design |
| Square vacuum frame 230x230 | Miniprofile |
Series Technical Data
| Parameter | Meaning |
|---|---|
| Release | Serial |
| Degree of protection | IP65 |
| Manufacturing | Standard / custom |
Product Photos
Where applicable
- Local zones of square geometry
- Checking the tightness of components and elements
- Work on industrial equipment
Questions about the item "Square Vacuum Frame"
For what applications is the Square Vacuum Frame position suitable?
The “Square Vacuum Frame” position is suitable for square and similar control zones. Used as a standard solution in local areas. Typical tasks include: Local zones of square geometry, Checking the tightness of components and elements, Work on industrial equipment.
Are there standard items for “Square Vacuum Frame” and how is procurement usually carried out?
For this position, selection is usually carried out according to the geometry of the object, so procurement begins with the parameters of the control area. To make a request, simply send the dimensions, description of the inspection area and application conditions, after which a design from the manufacturer RUNDT is selected.
Is it possible to make a "Square Vacuum Frame" according to customer's dimensions?
Yes. If the standard geometry is not suitable, RUNDT / TECH NK LLC can produce such a frame according to the customer’s dimensions, drawing, sketch or photo of the inspection area. This is relevant for non-standard seams, complex knots and special conditions of use.
What documents are available for the "Square Vacuum Frame" from the manufacturer?
RUNDT / TECH NK LLC provides the most complete open package of documents on serial vacuum frames, available for preliminary technical and procurement consideration. The website publishes a certificate of conformity, a title page of technical specifications, assortment materials and other confirmed information on the products of the series.
What needs to be sent to select or request a quotation for the position “Square vacuum frame”?
For selection, it is usually enough to send the type of product, the dimensions of the control zone, a brief description of the object, a photo of the site, a drawing or technical specification. This allows you to quickly determine whether a standard item is suitable or whether a custom product is required.
Other frame types
Round Vacuum Frame
Used on areas of circular and near-circular geometry.
Dimensions
D 240
Applications
Round knots andTanks and connections
Triangular Vacuum Frame
Used in areas where a triangular frame geometry is required.
Dimensions
195×195×195
Applications
Non-standard cont...Local areas are difficult...
Flat Vacuum Frame
Suitable for straight sections and typical welded joints.
Dimensions
620×80340×73
Applications
Inspection of straight weldsReservoirs and capacitive
Technical Consultation
Request for item "Square vacuum frame"
Submit a task, type size or technical specification. For non-standard sizes we will prepare a separate calculation.