Certificate
Certificate
Confirms that RUNDT vacuum frames comply with current requirements.
DownloadRUNDT Series
Triangular Vacuum Frame
Price on request
Solution for areas with specific geometries where a triangular contour shape and a compact control format are required.
Purpose
- Used in areas where a triangular frame geometry is required.
- Suitable for local non-standard control areas.
- Can be made in a different size if necessary.
Standard sizes
We will send you the current cost of the selected standard size and delivery time in response to your request.
| Frame size | Status | Note |
|---|---|---|
| 195×195×195 |
Available sizes to order
Below are the sizes and designs found in the RUNDT range for this type of frame. Non-standard items are calculated upon request.
| Name | Comment |
|---|---|
| Triangular vacuum frame 200x200x200 | Standard |
| Triangular vacuum frame 95x95x95 | Triangular design |
| Triangular vacuum frame 75x75x75 | Triangular design |
| Triangular vacuum frame 190x190x190 | Triangular design |
| Triangular vacuum frame 108x108x108 | Triangular design |
Series Technical Data
| Parameter | Meaning |
|---|---|
| Release | Serial |
| Degree of protection | IP65 |
| Manufacturing | Standard / custom |
Product Photos
Where applicable
- Non-standard control zones
- Local areas of complex geometry
- Preparation for work on special forms of construction
Questions about the position "Triangular Vacuum Frame"
For what applications is the Triangular Vacuum Frame position suitable?
The "Triangular Vacuum Frame" position is used in areas where a triangular frame geometry is required. Suitable for local non-standard control areas. Typical tasks include: Non-standard control zones, Local areas of complex geometry, Preparation for work on special forms of construction.
Are there standard items for “Triangular Vacuum Frame” and how is procurement usually carried out?
For this position, selection is usually carried out according to the geometry of the object, so procurement begins with the parameters of the control area. To make a request, simply send the dimensions, description of the inspection area and application conditions, after which a design from the manufacturer RUNDT is selected.
Is it possible to make a "Triangular Vacuum Frame" according to customer's dimensions?
Yes. If the standard geometry is not suitable, RUNDT / TECH NK LLC can produce such a frame according to the customer’s dimensions, drawing, sketch or photo of the inspection area. This is relevant for non-standard seams, complex knots and special conditions of use.
What documents are available for the "Triangular Vacuum Frame" from the manufacturer?
RUNDT / TECH NK LLC provides the most complete open package of documents on serial vacuum frames, available for preliminary technical and procurement consideration. The website publishes a certificate of conformity, a title page of technical specifications, assortment materials and other confirmed information on the products of the series.
What needs to be sent to select or request a gearbox for the position “Triangular vacuum frame”?
For selection, it is usually enough to send the type of product, the dimensions of the control zone, a brief description of the object, a photo of the site, a drawing or technical specification. This allows you to quickly determine whether a standard item is suitable or whether a custom product is required.
Other frame types
Square Vacuum Frame
Suitable for square and similar control areas.
Dimensions
230×230
Applications
Local zones square...Leak check...
Round Vacuum Frame
Used on areas of circular and near-circular geometry.
Dimensions
D 240
Applications
Round knots andTanks and connections
Vacuum frame 3D pyramid
Used in volumetric and spatial areas.
Dimensions
100×100×100
Applications
Volume areas andNon-standard cont...
Technical Consultation
Request for item “Triangular vacuum frame”
Submit a task, type size or technical specification. For non-standard sizes we will prepare a separate calculation.